 |
||
|
|
Rolling stock kits page. |
|
|
|
||
|
|
||
|
|
Click on the following to view: |
|
|
|
||
Bogie composite goods brake
This kit is based on the Tralee & Dingle No 221. built by the Bristol
Wagon &
Carriage Co. which also built stock for the Lynton & Barnstable Rly.
The kit includes bogies (diamond frame), truss rods, sliding doors,
brass rod for
door handles and grab rails. The roof is aluminium and can be made
removable
if desired. For tail lamp and vacuum pipes see accessories.
Uses include locomotive support van as a 330g can of gas will fit
inside, and
can be run on its own or in a mixed train, it also goes well with Garratts.
Available in 32 or 45 mm gauges, length over buffers 432 mm, width
100mm,
height 141 mm.
Price £ 70.00 (inc vat). Foreign orders quoted at current exchange rate.
Kit 2
Bogie 4 plank open wagon.
This 4 plank bogie open wagon is based on early 20th century wagons
built
for WW1 use as well as later railways. These wagons were
used for many
purposes such as carrying coal, stone, farm produce and manufactured
goods.
This kit is supplied to 32mm gauge with either small or large bogies.
Length over buffers 340mm, width 89mm, height 68mm.
Supplied to 32mm
or 45mm gauge.
.
Price with small bogies £ 50.00 or with large bogies
£ 52.50 (inc vat).
Kit 3
Bogie goods van
This goods van is to a freelance design to go with Kit1 or other kits
such
as I. P. Engineering or Roundhouse.
The kit includes bogies, aluminium roof and brass door handles. This
size
of
van goes well with Garratts.
Available in 32 or 45mm gauges.
Price £ 60.00 (inc vat).
Kit 4
Shunting/match truck
A really useful truck for coupling anything to anything a must
for all
railways.
The kit includes multi-height
buffers, brass handrails and
handrail knobs. You can throw away those paper clips!
Photo shows truck with shuntsman (made by Busy Bodies) exclusive to
Jim's Models and coupling/tool chest (made by AnDel models exclusive
to Jim's Models) which are optional extras. See special offer!
Available in 32 or 45mm gauges.
Price £ 44.00 (inc vat).
Special offer. If purchased with shuntsman and storage chest £ 59.00 a saving of £5.00.
Note see Technical Help for instruction update.
Industrial range
This is a range of kits designed to represent rolling
stock used by small industrial railways such as vegetable farms, turf
cutting, peat suppliers and mineral miners.
Eminently suitable for
weathering and customising!
Kit 5
Flat wagon
This a basic wagon adaptable to many uses. Supplied with wheels
and buffers to 32 mm gauge only.
Price £ 18.00 (inc vat). .
Kit 6
Plank ended wagon
This kit has individual plank ends and can be adapted to your
requirements.
Used for crops like peas, potatoes, products like peat and turf, even
for
for what you like! Supplied with wheels and buffers to 32 mm gauge only.
Price £ 19.50 (inc vat).
See accessories page for extra detailing.
Kit 7
Dinorwic guards van
This kit is a scale model of the van preserved in the Tallylin Museum.
It has
internal framing as well as a bench for personnel to sit on. It is
equipped with slaters
Slaters wheels single or double flanged as well as Dinorwic axle-boxes
and
couplings.
Kit 7/s Price £ 48.00 Single flanged.
Kit 7/d Price £ 50.00 Double flanged. flanged.
Special offer. If purchased
with Dinorwic Guard Kit 7/a £ 58.00
a saving of £2.00.
Special offer. If purchased
with Dinorwic Guard Kit 7/d £ 60.00
a saving of £2.00.
To complement the Donorwic guards van
I am stocking Slater's kit 16W01
Price £ 16.86 Single flanged.
Also in stock
16DW03 Ffestinog braked slate wagon £22.48 ea.
16DW04 Ffestiniog slate wagon £21.46 ea.
